The PCB is complete. It looks good. I was able to fit it all on a 3″ x 4″ board. I searched for some PCB vendors that would not charge me US$100 for a few boards and found one in particular (http://youpcb.com) that quoted an acceptable price for total for 10 PCB’s. Ordering 5 pcs was only US$8 less, so it made sense to order the extras as there may be some folks reading about this project that may want some. I submitted my GERBER files and am awaiting feedback from the fabricator.
Below is the PCB artwork plot file. Silkscreen, top layer clad and bottom layer clad. Click here for the PDF file.
8052 Single Board Computer 
One thought on “Creating the PCB for the 8052 SBC”